Poly Processing Accessories

LADDER ASSEMBLIES

Poly Processing’s tank ladders are available in heights from 6 to 20 feet, depending on the tank application. To determine height, ladder height equals height to top of manway rounded to the nearest foot. If height of ladder exceeds the height of the manway, subtract 1 foot.

• Ladders are available in mild steel as well as FRP construction.
• All ladders meet OSHA requirements.
• Ladders are not offered on all tanks due to safety requirements. Approved systems are noted with the appropriate ladder height in the distributor price list.
• Cages range from 7 to 8 feet and extend 4 feet above the top rung of the ladder.

Tanks with a center manway will have the additional cost of a platform to reach the ladder.

Drawings

• FRP ladder assembly
• Steel ladder assembly (1 of 3)
• Steel ladder assembly (2 of 3)
• Steel ladder assembly (3 of 3)
• Ladder bracket for molded ladder lugs

HEAT PADS AND INSULATION

Poly Processing’s tank heating systems are specifically designed for temperature maintenance of polyethylene tanks. SilcoPad® tank heating systems maintain a desired product temperature, not to exceed 100 degrees F.

• Each heating system consists of tank heating pad(s) and a temperature controller. The quantity and type of SilcoPad® tank heating pads required is determined by the size of the tank, the desired temperature maintenance and environmental conditions.
• Tanks are available with standard heating systems with a Delta T of 30, 60 and 100 degrees F.
• Tanks are typically supplied with the heating panels and a controller installed by Poly Processing. The only field connection required is a power supply to the heating system.

For technical information on poly tank heating pads and insulation, download the guide below.

OPTIC LEAK DETECTION SWITCH

This switch is an excellent choice for leak detection in secondary containment tanks. The submersible sensor is mounted in the interstitial space of the tank. The internal 1A relay provides a reliable switch interface with indicators, PLCs, SCADAs and alarms.

• Fail-safe leak sensor inverts wet to alert user for maintenance.
• Rugged PP or PFA Teflon® probe and cable rated NEMA 6
• 1A relay selectable NO or NC via power supply wiring polarity
• Compatible with MicroPoint™ multi-channel indicator

ULTRASONIC LEVEL SWITCH

This CSA-approved switch is intrinsically safe for use in hazardous-area locations. The Ultrasonic Level Switch is broadly used in chemical liquids. Its 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. This submersible sensor is universally mounted through the wall inside the tank.

• CSA-approved intrinsically safe for use in hazardous-area locations
• Rugged PP or PFA Teflon® probe and cable rated NEMA 6
• 1A relay selectable NO or NC via power supply wiring polarity
• Compatible with MicroPoint™ multi-channel indicator

ULTRASONIC LEVEL INDICATORS

Poly Processing supplies a broad range of ultrasonic level indicators from major manufacturers. Please contact inside sales to determine which indicator is best suited for your application.

AGITATOR AND MIXER BRACKETS

Poly Processing offers multiple styles of agitator and mixer brackets to address various applications. We can custom design a solution to meet your specific needs. Styles include: free standing; small portable mixer attachments; or large brackets that integrate with the tank. Agitator and mixer brackets are available in mild steel – painted; mild steel – epoxy coated; mild steel – powder coated; and stainless steel.

Drawings

• Free standing clamp style agitator support
• Small free standing bolt on agitator support
• Tank mount mixer support example vertical
• Free standing agitator bracket for 540 to 3150 gallon tanks
• Clamp on agitator brackets – heavy duty – vertical tanks (50 to 3050 gallon upright tank)
• Agitator bracket – heavy duty – up to 8’6″ tanks
• Agitator bracket – heavy duty – up to 10′ tanks
• Agitator brackets – heavy duty – up to 12′ tanks