Description
Lutz-JESCO AIRTRANTM pumps are available in many different sizes and materials of construction to suit all of your application needs. Both clamp bands and bolted versions are available. The pump range comprises a 1/4″ size, all the way to a 3″ size.
Lutz-JESCO AIRTRANTM pump housings are available in Polypropylene, PVDF, Nylon, Conductive Nylon, Aluminum and Stainless Steel, the membranes, ball valves and o-rings are available in Teflon, FKM (Viton), Geolast (Buna-N) and Santoprene.
Pump capacities go up to 255 gpm with maximum air pressures up to 120 psi.
Bolted AIRTRAN Pump - 1" Metallic
Bolted AIRTRAN Pump – 1″ Metallic
Simple, Versatile, Easy to Operate
Lutz-JESCO America Corp’s 1″ bolted version (metallic) is ideally suited for use with drum and small tank transfer, pickling solutions, and chemical feed.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Aluminium | Stainless Steel 1.4404 (316) | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | |||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | |||
| Seals | Geoplast®, Santoprene®, Teflon®, Viton® | |||
| Valve seat | PP, Nylon | Stainless Steel | ||
| Flow rate | gpm | 41 | ||
| Volume per stroke* | 0.22 | |||
| Suction lift dry | ft | 14.7 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Maximum air pressure | psi | 120 | ||
| Temperature limits | °F | 200 | ||
| Solids handling | inches | max. Ø 0.25 | ||
| Air inlet | 1/4″ NPT female (G 1/2″ female)1) | |||
| Air outlet | 3/8″ NPT female | |||
| Suction | 1″ NPT | |||
| Discharge | 1″ NPT | |||
| Weight | lbs | 23 | 45 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
1) If the air flow control valve is used.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1" Non-Metallic
Bolted AIRTRAN Pump – 1″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1″ bolted version (non-metallic) is ideally suited for use in drum and small tank transfer, pickling solutions, and chemical feed.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene®, Teflon®, Viton® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon®, Viton® | ||
| Seals | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon®, Viton® | ||
| Valve seat | PP | Kynar® | ||
| Flow rate | gpm | 41.2 | ||
| Volume per stroke* | gal/stroke | 0.83 | ||
| Suction lift dry | ft | 14.7 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 200 | ||
| Solids handling | inches | max. Ø 0.24 | ||
| Air inlet | 1/4″ NPT female 1/2″ BSP female |
|||
| Air outlet | 3/8″ NPT female | |||
| Suction | 1″ DIN / ANSI Flange | |||
| Discharge | 1″ DIN / ANSI Flange | |||
| Weight | lbs | 20 | 30 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1/2" Metallic
Bolted AIRTRAN Pump – 1/2″ Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1/2″ bolted version (metallic) is ideally suited for use with 200 l-drum pumping, ink recirculation and feed, chemicals, solvents, acids, and soap dispensing.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Aluminium | Stainless Steel 1.4404 (316) | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | |||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | |||
| Seals | Geoplast®, EPDM, Teflon®, Viton® | |||
| Valve seat | PP, Nylon | Stainless Steel | ||
| Flow rate | gpm | 17 | ||
| Volume per stroke* | gal/stroke | 0.25 | ||
| Suction lift dry | ft | 14.7 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 200 | ||
| Solids handling | inches | max. Ø 0.12 | ||
| Air inlet | 1/4″ NPT female G 1/2″ BSP female |
|||
| Air outlet | 3/8″ NPT female | |||
| Suction | 1/2″ NPS female | |||
| Discharge | 1/2″ NPS female | |||
| Weight | lbs | 10 | 19 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1/2" Non-Metallic
Bolted AIRTRAN Pump – 1/2″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1/2″ bolted version (non-metallic) is ideally suited for use in 200 l-drum pumping, ink recirculation and feed, chemicals, solvents, acids and soap dispensing.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | Nylon | ||
|---|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene® / EPDM, Teflon®, Viton® | Geoplast®, Teflon® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene® / EPDM, Teflon®, Viton® | Geoplast®, Teflon® | ||
| Seals | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene® / EPDM, Teflon®, Viton® | Geoplast®, Teflon® | ||
| Valve seat | PP | Kynar® | Nylon | ||
| Flow rate | gpm | 17.2 | |||
| Volume per stroke* | gal/stroke | 0.25 | |||
| Suction lift dry | ft | 14.7 | |||
| Suction lift Teflon® | ft | 9.8 | |||
| Max. operating pressure | psi | 120 | |||
| Temperature limits | °F | 150 | 200 | 150 | |
| Solids handling | inches | max. Ø 0.12 | |||
| Air inlet | 1/4″ NPT female | ||||
| Air outlet | 3/8″ NPT female | ||||
| Suction | 1/2″ NPS female | ||||
| Discharge | 1/2″ NPS female | ||||
| Weight | lbs | 9 | 12 | 9 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1/4" Non-Metallic
Bolted AIRTRAN Pump – 1/4″ Non-Metallic
Simple, Versatile, Easy to Operate
Lutz-JESCO America Corp’s 1/4″ bolted version (non-metallic) is ideally suited for use in laboratories, small manufacturing plants, and for applications with small delivery volume at relatively high pressure.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | Nylon | ||
|---|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon® | Teflon® | Teflon® | ||
| Valve material | Teflon® | Teflon® | Teflon® | ||
| Seats | Geoplast®, Santoprene®, Teflon® | Teflon® | Teflon® | ||
| Flow rate | gpm | 4.3 | |||
| Volume per stroke* | gal/stroke | 0.006 | |||
| Suction lift dry | ft | 17 | |||
| Max. operating pressure | psi | 100 | |||
| Temperature limits | °F | 150 | 200 | 150 | |
| Solids handling | inches | max. Ø 0.06 | |||
| Air inlet | 1/4″ NPT female G 1/2 NPT female |
||||
| Air outlet | 1/4″ NPSF female | ||||
| Suction | 1/4″ NPT female | ||||
| Discharge | 1/4″ NPT female | ||||
| Weight | lbs | 5 | 7 | 5 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1 1/2" Metallic
Bolted AIRTRAN Pump – 1 1/2″ Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1 1/2″ bolted version (metallic) is ideally suited for use with filter presses, tank cleaning systems, pigments and resins.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Aluminium | Stainless Steel 1.4404 (316) | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon® | |||
| Valve ball materials | Geoplast®, Santoprene®, Teflon® | |||
| Seals | Geoplast®, EPDM, Teflon® | |||
| Valve seat | PP, Nylon | Stainless Steel | ||
| Flow rate | gpm | 130 | ||
| Volume per stroke* | gal/stroke | 0.46 | ||
| Suction lift dry | ft | 14.7 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 200 | ||
| Solids handling | inches | max. Ø 0.25 | ||
| Air inlet | 3/4″ NPT female (3/4″ BSP female)1) | |||
| Air outlet | 3/4″ NPT female | |||
| Suction | Flange DIN DN40, PN10 / ANSI B 16.5 1 1/2″ 150 psi | |||
| Discharge | Flange DIN DN40, PN10 / ANSI B 16.5 1 1/2″ 150 psi | |||
| Weight | lbs | 61.6 | 133 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
1) If the air flow control valve is used.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 1 1/2" Non-Metallic
Bolted AIRTRAN Pump – 1 1/2″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1 1/2″ bolted non-metallic pumps are engineered for maximum fluid and chemical compatibility. Heavy duty, stall free, non-metallic air section ensures stall free & freeze free operation. Rugged valve system allows operation under a variety of conditions, ranging from clean fluids to slurries, to solids applications. Bolted design provides ease of maintenance and leak free operation. Available in a variety of materials and options.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | PVDF | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene®, Teflon®, Viton® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon®, Viton® | ||
| Seals | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon®, Viton® | ||
| Valve seat | PP | PVDF | ||
| Flow rate | gpm | 130 | ||
| Volume per stroke* | gal/stroke | 0.83 | ||
| Suction lift dry | ft | 15 | ||
| Suction lift Teflon® | ft | 10 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 150 | ||
| Solids handling | inches | max. Ø 0.24 | ||
| Air inlet | 3/4″ NPT / BSP female | |||
| Air outlet | 3/4″ NPT / BSP female | |||
| Suction | 1.5″ DIN / ANSI Flange | |||
| Discharge | 1.5″ DIN / ANSI Flange | |||
| Weight | lbs | 46 | 65 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 2" Metallic
Bolted AIRTRAN Pump – 2″ Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 2″ bolted version (metallic) is ideally suited for use with paint, latex, ceramic slip, slurries, polymers, tank car fill and empty, foods.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Aluminium | Stainless Steel 1.4404 (316) | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon® | |||
| Valve ball materials | Geoplast®, Santoprene®, Teflon® | |||
| Seals | Geoplast®, EPDM, Teflon® | |||
| Valve seat | PP, Nylon | Stainless Steel | ||
| Flow rate | gpm | 180 | ||
| Volume per stroke* | gal/stroke | 0.48 | ||
| Suction lift dry | ft | 15 | ||
| Suction lift Teflon® | ft | 10 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 200 | ||
| Solids handling | inches | max. Ø 0.25 | ||
| Air inlet | 3/4″ NPT / BSP female | |||
| Air outlet | 3/4″ NPT / BSP female | |||
| Suction | 2″ DIN / ANSI Flange | |||
| Discharge | 2″ DIN / ANSI Flange | |||
| Weight | lbs | 61 | 133 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 2" Non-Metallic
Bolted AIRTRAN Pump – 2″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp. has engineered their 2″ bolted non-metallic pumps for maximum fluid and chemical compatibility. Heavy duty, stall free, non-metallic air section ensures stall free & freeze free operation. Rugged valve system allows operation under a variety of conditions, ranging from clean fluids to slurries, to solids applications. Bolted design provides ease of maintenance and leak free operation. Available in a variety of materials and options.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon® | Teflon® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon® | Teflon® | ||
| Seals | Geoplast®, Santoprene®, Teflon® | Teflon® | ||
| Valve seat | PP | Kynar® | ||
| Flow rate | gpm | 180 | ||
| Volume per stroke* | gal/stroke | 0.48 | ||
| Suction lift dry | ft | 15 | ||
| Suction lift Teflon® | ft | 10 | ||
| Max. operating pressure | psi | 120 | ||
| Temperature limits | °F | 150 | 200 | |
| Solids handling | inches | max. Ø 0.25 | ||
| Air inlet | 3/4″ NPT / BSP female | |||
| Air outlet | 3/4″ NPT / BSP female | |||
| Suction | 2″ DIN / ANSI Flange | |||
| Discharge | 2″ DIN / ANSI Flange | |||
| Weight | lbs | 48 | 69 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Bolted AIRTRAN Pump - 3" Metallic
Bolted AIRTRAN Pump – 3″ Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 3″ bolted version (metallic) is ideally suited for use with paint, latex, ceramic slip, slurries, polymers, and tank car fill and empty.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Aluminium | ||
|---|---|---|---|
| Diaphragm materials | Urethane, Santoprene®, Teflon®, Viton® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon® | ||
| Seals | Geoplast®, EPDM, Teflon® | ||
| Valve seat | PP, Nylon, EPDM, Teflon® | ||
| Flow rate | gpm | 255 | |
| Volume per stroke* | gal/stroke | 1.23 | |
| Suction lift dry | ft | 14.7 | |
| Suction lift Teflon® | ft | 9.8 | |
| Max. operating pressure | psi | 120 | |
| Temperature limits | °F | 200 | |
| Solids handling | inches | max. Ø 0.44 | |
| Air inlet | 3/4″ NPT female (3/4″ BSP female)1) | ||
| Air outlet | 3/4″ NPT female | ||
| Suction | 3″ NPT female | ||
| Discharge | 3″ NPT female | ||
| Weight | lbs | 130 |
*) Based on flooded suction conditions with water and 100 psi air pressure.
1) If the air flow control valve is used.
Subject to technical changes
Downloads
Clamped AIRTRAN Pump - 1" Non-Metallic
Clamped AIRTRAN Pump – 1″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1″ clamped version (non-metallic) is ideally suited for use in drum and small tank transfer, pickling solutions, and chemical feed.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon® | ||
| Seals | Geoplast®, EPDM, Teflon®, Viton® | Teflon® | ||
| Valve seat | PP | Kynar® | ||
| Flow rate | gpm | 40.2 | ||
| Volume per stroke* | gal/stroke | 0.83 | ||
| Suction lift dry | ft | 14.7 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Max. operating pressure | psi | 100 | 70.6 | |
| Temperature limits | °F | 150 | 200 | |
| Solids handling | inches | max. Ø 0.25 | ||
| Air inlet | 1/4″ NPT female G 1/2 female |
|||
| Air outlet | 3/4″ NPT female | |||
| Suction | 1″ NPT female | |||
| Discharge | 1″ NPT female | |||
| Weight | lbs | 19 | 22 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Clamped AIRTRAN Pump - 1/2" Non-Metallic
Clamped AIRTRAN Pump – 1/2″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 1/2″ clamped version (non-metallic) is ideally suited for use in 55 gallon drum pumping, ink recirculation and feed, chemicals, solvents, acids and soap dispensing.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | ||
|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Teflon® | ||
| Seals | Geoplast®, EPDM, Teflon®, Viton® | Teflon® | ||
| Valve seat | PP | Kynar® | ||
| Flow rate | gpm | 14 | ||
| Volume per stroke* | gal/stroke | 0.25 | ||
| Suction lift dry | ft | 14.8 | ||
| Suction lift Teflon® | ft | 9.8 | ||
| Max. operating pressure | psi | 100 | ||
| Temperature limits | °F | 150 | 200 | |
| Solids handling | inches | max. Ø 0.12 | ||
| Air inlet | 1/4″ NPT female G 1/2 BSP female |
|||
| Air outlet | 3/8″ NPT female | |||
| Suction | 1/2″ NPS female | |||
| Discharge | 1/2″ NPS female | |||
| Weight | lbs | 7.9 | 10.8 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
Downloads
Clamped AIRTRAN Pump - 3/8" Non-Metallic
Clamped AIRTRAN Pump – 3/8″ Non-Metallic
Simplicity, Versatility, Easy of Handling
Lutz-JESCO America Corp’s 3/8″ clamped version (non-metallic) is ideally suited for use with chemical recirculation and feed, liquids with solid particles, (e.g. paints and lacquers) and electroplating.
- Absolutely lube free valve
- Corrosion free materials of construction
- Non-stalling function at low pressures
- No close fitted or rotating parts
- Can safely run dry
- No generated heat due to the absence of an electric motor
- Can handle abrasive solids
- Service-friendly construction
- Easy assembly and disassembly
- Reduced operating costs
Technical Details
| Housing material | Polypropylene | Kynar® | Nylon | ||
|---|---|---|---|---|---|
| Diaphragm materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene® / EPDM, Teflon®, Viton® | Geoplast®, Teflon®, Viton® | ||
| Valve ball materials | Geoplast®, Santoprene®, Teflon®, Viton® | Santoprene® / EPDM, Teflon®, Viton® | Geoplast®, Teflon®, Viton® | ||
| Seals | Geoplast®, EPDM, Teflon®, Viton® | Teflon® | Geoplast®, Teflon® | ||
| Valve seat | PP | Kynar® | Nylon | ||
| Flow rate | gpm | 9 | |||
| Volume per stroke* | gal/stroke | 0.12 | |||
| Suction lift dry | ft | 17 | |||
| Suction lift Teflon® | ft | 9.8 | |||
| Max. operating pressure | psi | 120 | |||
| Temperature limits | °F | 150 | 200 | 150 | |
| Solids handling | inches | max. Ø 0.25 | |||
| Air inlet | 1/4″ NPS female G 1/2 BSP female |
||||
| Air outlet | 3/8″ NPS female | ||||
| Suction | 3/8″ NPS female | ||||
| Discharge | 3/8″ NPS female | ||||
| Weight | lbs | 3.7 | 5 | 5 | |
*) Based on flooded suction conditions with water and 100 psi air pressure.
Subject to technical changes
