Description
| Vantage 5000 Modbus® | Vantage 5000 Control | Vantage 5000 SCADA LV | Vantage 5000 SCADA HV | Vantage 5000 Remote |
|---|---|---|---|---|
 |
 |
|
|
|
Technical Overview
| Pump Model | Control | Remote | SCADA | Modbus® |
|---|---|---|---|---|
| Tube Burst Detector | ✔ | ✔ | ✔ | ✔ |
| 0-10V Input/Output | ✔ | ✔ | ✔ | |
| 4-20mA Input/Output | ✔ | ✔ | ✔ | |
| Opto-Isolation | ✔ | ✔ | ||
| Touchscreen display | ✔ | ✔ | ✔ | ✔ |
| USB File Backup | ✔ | ✔ | ✔ | ✔ |
| Variable flow | ✔ | ✔ | ✔ | ✔ |
| Dose mode | ✔ | ✔ | ✔ | ✔ |
| Batch mode | ✔ | ✔ | ✔ | ✔ |
| Timer control mode | ✔ | ✔ | ✔ | ✔ |
| Full calibration with choice of flow units | ✔ | ✔ | ✔ | ✔ |
| Process specific screen display | ✔ | ✔ | ✔ | ✔ |
| Three level password protection | ✔ | ✔ | ✔ | ✔ |
| Proportional Flow Rate | ✔ | ✔ | ✔ | |
| Number of Control Inputs | 7 | 7 | 7 | |
| Pump Status Outputs | 4 | 4 | 4 | |
| Modbus® RTU Protocol | ✔ |
Verderflex Vantage 5000 Modbus®
Verderflex Vantage 5000 Modbus®
Modbus® RTU is a globally used, open data communications protocol that allows a single master controller, such as a PLC, to easily interface with multiple, uniquely addressed Verderflex Vantage 5000 pumps in a digitally controlled, high resolution dosing or metering system. Vantage 5000 pumps can be networked over an industry standard, license free data network, simplifying the integration of the Vantage 5000 into PLC controlled data highways. MODBUS RTU allows a network of Vantage 5000 pumps to be uniquely identified and controlled by a single master controller PLC or computer with real-time parameter feedback and alarms.
| Vantage 5000 Modbus® | |
|---|---|
| Protocol | Modbus® RTU |
| Max. flow rate | 6600 ml/min |
| Max. (discharge) pressure | 7 bar |
| Turn down ratio | 4000:1 |
| Protection Standard | IP66 & NEMA 4X |
| Display & Programming | Intuitive 110mm Full Colour Touch Screen LCD |
| Dosing Program Backup | USB v2 dataport |
| Analogue Input rating | 0-10V, 4-20mA, Frequency |
| Analogue Outputs rating | 0-10V, 4-20mA, Frequency |
| Number of Control Inputs | 7 |
| Number of Status Outputs | 4 |
| Tube Failure Detection | Standard |
| Maximum Pump Speed | 400 rpm |
| Power Supply rating | 85-265V 50/60Hz 1 Phase |
Suction Lift Performance – Verderflex Vantage 5000 Modbus®
Verderflex Vantage 5000 Modbus® applications
- Brewery
- Chemical dosing
- Food flavouring
- Mineral processing
- Pharmaceutical
- Water treatment
Verderflex Vantage 5000 Modbus® downloads
Vantage 5000 Manual English Vantage 5000 Manual Deutsch
Verderflex Vantage 5000 Control
Verderflex Vantage 5000 Control
The Verderflex Vantage 5000 Control is the next generation in cased drive tube pumps combining precision dosing and dispensing accuracy with high discharge pressures, an intuitive touch screen user interface and a USB data backup port
| Vantage 5000 Control | |
|---|---|
| Max. flow rate | 6600 ml/min |
| Max. (discharge) pressure | 7 bar |
| Turn down ratio | 4096:1 |
| Protection Standard | IP66 & NEMA 4X |
| Display & Programming | Intuitive 110mm Full Colour Touch Screen LCD |
| Dosing Program Backup | USB v2 dataport |
| Program Storage Memory | 20 program dosing and batching programs |
| Main Menu Access | 5 password protected accounts |
| Tube Failure Detection | Standard |
| Timer Specification | Real time event clock |
| Maximum Pump Speed | 400 rpm |
| Power Supply Rating | 85-265V 50/60Hz 1 Phase |
| Max Temperature | 40°C |
| Tube Connections | Loose tubing, Quick Release & Mini TriClamp |
Typical Flow Rates – Vantage 5000 Control
Verderflex Vantage 5000 Control applications
- Brewery
- Chemical dosing
- Food flavouring
- Mineral processing
- Pharmaceutical
- Water treatment
Verderflex Vantage 5000 Control downloads
Vantage 5000 Manual English Vantage 5000 Manual Deutsch
Verderflex Vantage 5000 SCADA LV
Verderflex Vantage 5000 SCADA LV
The Verderflex Vantage 5000 SCADA LV is the next generation in 24V DC opto-isolated remotely controlled cased drive tube pumps combining precision dosing and dispensing accuracy with high discharge pressures, an intuitive touch screen user interface and a USB data backup port. Ideal for SCADA systems, control signal inputs & outputs include 0-10V, 4 to 20mA & proportional flow modes, 7 control volt free inputs & 4 volt free status outputs.
| Vantage 5000 SCADA LV | |
|---|---|
| I/O Protection | Opto isolated 24V DC |
| Max. flow rate | 6600 ml/min |
| Max. (discharge) pressure | 7 bar |
| Turn down ratio | 4096:1 |
| Protection Standard | IP66 & NEMA 4X |
| Display & Programming | Intuitive 110mm Full Colour Touch Screen LCD |
| Dosing Program Backup | USB v2 dataport |
| Analogue Input rating | 0-10V, 4-20mA, Frequency |
| Analogue Outputs rating | 0-10V, 4-20mA, Frequency |
| Number of Control Inputs | 7 |
| Number of Status Outputs | 4 |
| Tube Failure Detection | Standard |
| Maximum Pump Speed | 400 rpm |
| Power Supply rating | 85-265V 50/60Hz 1 Phase |
Typical Flow Rates – Verderflex Vantage 5000 SCADA LV
Verderflex Vantage 5000 SCADA LV applications
- Brewery
- Chemical dosing
- Food flavouring
- Mineral processing
- Pharmaceutical
- Water treatment
Verderflex Vantage 5000 SCADA LV downloads
Vantage 5000 Manual English Vantage 5000 Manual Deutsch
VerderFlex Vantage 5000 SCADA HV
Verderflex Vantage 5000 SCADA HV
Modbus® RTU is a globally used, open data communications protocol that allows a single master controller, such as a PLC, to easily interface with multiple, uniquely addressed Verderflex Vantage 5000 pumps in a digitally controlled, high resolution dosing or metering system. Vantage 5000 pumps can be networked over an industry standard, license free data network, simplifying the integration of the Vantage 5000 into PLC controlled data highways. MODBUS RTU allows a network of Vantage 5000 pumps to be uniquely identified and controlled by a single master controller PLC or computer with real-time parameter feedback and alarms.
| Vantage 5000 Modbus® | |
|---|---|
| Protocol | Modbus® RTU |
| Max. flow rate | 6600 ml/min |
| Max. (discharge) pressure | 7 bar |
| Turn down ratio | 4000:1 |
| Protection Standard | IP66 & NEMA 4X |
| Display & Programming | Intuitive 110mm Full Colour Touch Screen LCD |
| Dosing Program Backup | USB v2 dataport |
| Analogue Input rating | 0-10V, 4-20mA, Frequency |
| Analogue Outputs rating | 0-10V, 4-20mA, Frequency |
| Number of Control Inputs | 7 |
| Number of Status Outputs | 4 |
| Tube Failure Detection | Standard |
| Maximum Pump Speed | 400 rpm |
| Power Supply rating | 85-265V 50/60Hz 1 Phase |
Suction Lift Performance – Verderflex Vantage 5000 SCADA HV
Verderflex Vantage 5000 Modbus® applications
- Brewery
- Chemical dosing
- Food flavouring
- Mineral processing
- Pharmaceutical
- Water treatment
Verderflex Vantage 5000 SCADA HV downloads
Vantage 5000 Manual English Vantage 5000 Manual Deutsch
Verderflex Vantage 5000 Remote
Verderflex Vantage 5000 Remote
The Verderflex Vantage 5000 Remote is the next generation in remotely controlled cased drive tube pumps combining precision dosing and dispensing accuracy with high discharge pressures, an intuitive touch screen user interface and a USB data backup port. Control signal inputs & outputs include 0-10V, 4 to 20mA & proportional flow modes, 7 control volt free inputs & 4 volt free status outputs.
| Vantage 5000 Remote | |
|---|---|
| Max. flow rate | 6600 ml/min |
| Max. (discharge) pressure | 7 bar |
| Turn down ratio | 4096:1 |
| Protection Standard | IP66 & NEMA 4X |
| Display & Programming | Intuitive 110mm Full Colour Touch Screen LCD |
| Dosing Program Backup | USB v2 dataport |
| Analogue Input rating | 0-10V, 4-20mA, Frequency |
| Analogue Outputs rating | 0-10V, 4-20mA, Frequency |
| Control Inputs | 7 |
| Status Outputs | 4 |
| Main Menu Access | 5 Password protected accounts |
| Tube Failure Detection | Standard |
| Maximum Pump Speed | 400 rpm |
| Power Supply rating | 85-265V 50/60Hz 1 Phase |
Typical Flow Rates – Vantage 5000 Remote
Verderflex Vantage 5000 Remote applications
- Brewery
- Chemical dosing
- Food flavouring
- Mineral processing
- Pharmaceutical
- Water treatment
Verderflex Vantage 5000 Remote downloads
Vantage 5000 Manual English Vantage 5000 Manual Deutsch
